A clean connector end face is essential to a working fiber optic network. Dust and contaminates can increase insertion loss and link loss putting your link loss budgets out of specification. All connectors should be cleaned, onsite, just prior to plugging them into active devices, passive patch panels, and interconnection points. These LC, SC and MTP/MPO kits include an adapter for cleaning both connectors themselves and internal connectors installed in adapters.
Opticonx’s PEK SERIES pulling eye kits protect pre-terminated fiber optic cables during installation in conduits, ducts or risers. Available to be used with 2 to 24 fiber cables, PEK SERIES saves time and costs by allowing the installation of pre-connectorized multi fiber cables. The pulling eye is strain relieved directly onto the cable’s outer jacket, while housing the terminations in a protective sheath. As a result, no stress or strain is transferred to the terminations during the cable installation process. Available factory installed or in kit form for installation in the field.
|PART NUMBER||TERMINATIONS||SHEATH DIAMETER||PULL STRENGTH|
|PEK-02||1 to 2 connectors||.75"||125 lbs|
|PEK-06||3 to 6 connectors||.75"||125 lbs|
|PEK-12||7 to 12 connectors||1"||125 lbs|
|PEK-24||13 to 24 connectors||1"||125 lbs|
|PEK-36||25 to 36 connectors||1.5"||125 lbs|
|PEK-48||37 to 48 connectors||1.5"||125 lbs|
|PEK-72||49 to 72 connectors||1.5"||125 lbs|
|PEK-96||73 to 96 connectors||1.5"||125 lbs|